FINITE ELEMENT MODELING OF SINGLE AND MULTI-SPHERICAL FRICTION PENDULUM BEARINGS
@inproceedings{Kavvadias2017FINITEEM, title={FINITE ELEMENT MODELING OF SINGLE AND MULTI-SPHERICAL FRICTION PENDULUM BEARINGS}, author={Ioannis E. Kavvadias and Henrick Bibo and Lazaros K. Vasiliadis}, year={2017} }
Abstract. Base isolation is a modern strategy to decrease the effects of earthquakes on buildings of high significance. The general principle is that the structure is decoupled from the horizontal components of the earthquake ground motion by interposing a layer with low lateral stiffness between the structure and the foundation. One of the major devices to apply seismic isolation is Friction Pendulum Systems, which use the characteristics of a pendulum to lengthen the natural period of the…
5 Citations
Figures and Tables from this paper
5 Citations
NUMERICAL STUDY ON THE DYNAMIC RESPONSE OF CLASSICAL COLUMN STANDING FREE ON AN ISOLATED BASE
- Engineering
- 2017
A numerical study of the seismic response of base isolated free standing monolithic ancient column is presented in this paper. These rocking structural systems are analyzed standing free on an…
The shear pin strength of friction pendulum bearings (FPB) in simply supported railway bridges
-
EngineeringBulletin of Earthquake Engineering
- 2019
The friction pendulum bearings (FPB) begin to be used in railway bridges in China. In one earthquake region in China, the shear pins of FPB are required to be well to provide the enough shear force…
Modifikasi Perencanaan Rumah Susun Pasar Rebo dengan Base Isolation Tipe Friction Pendulum System pada Daerah Rawan Gempa
- Jurnal Teknik ITS
- 2021
Abstrak—Tingginya aktivitas seismik dan potensi gempa menuntut perencanaan struktur gedung dengan kinerja yang baik saat gempa terjadi. Tipe penahan gempa konvensional seperti sistem rangka pemikul…
References
SHOWING 1-10 OF 16 REFERENCES
Modeling Triple Friction Pendulum Bearings for Response-History Analysis
- Engineering
- 2008
There are currently no applicable hysteresis rules or nonlinear elements available in structural analysis software that can be used to exactly model triple Friction Pendulum bearings for…
Characterization and modeling of multiple friction pendulum isolation system with numerous sliding interfaces
- Engineering
- 2010
In order to systematically investigate the mechanical characteristic of a multiple friction pendulum system with numerous concave sliding interfaces and one articulated slider located between these…
Correct treatment of rotation of sliding surfaces in a kinematic model of the triple friction pendulum bearing
- Engineering
- 2013
This paper addresses the treatment of the rotation of the internal components of the triple friction pendulum (TFP) isolation bearing in a numerical model previously presented by the authors. The…
Spherical sliding isolation bearings with adaptive behavior: Theory
- Engineering
- 2008
The principles of operation and force–displacement relationships of three novel spherical sliding isolation bearings are developed in this paper. These bearings are completely passive devices, yet…
Teflon Bearings in Base Isolation II: Modeling
- Materials Science, Engineering
- 1990
A mathematical model of the factional behavior of Teflon sliding bearings for conditions of interest in base isolation is developed. The calibration of the model is based on extensive experimental…
Achieving reliable seismic performance enhancement using multi‐stage friction pendulum isolators
- Engineering
- 2010
An objective in the design of seismically isolated structures is the selection of isolator properties so that performance enhancements are reliably achieved over a range of excitations and…
Behaviour of the double concave Friction Pendulum bearing
- Engineering
- 2006
The double concave Friction Pendulum (DCFP) bearing is an adaptation of the well‐known single concave Friction Pendulum bearing. The principal benefit of the DCFP bearing is its capacity to…
Characterizing friction in sliding isolation bearings
- Engineering
- 2015
The force–displacement behavior of the Friction Pendulum™ (FP) bearing is a function of the coefficient of sliding friction, axial load on the bearing and effective radius of the sliding surface. The…
Seismic evaluation and retrofitting of reinforced concretebuildings with base isolation systems
- Engineering
- 2016
A parametric study on the nonlinear seismic response of isolated reinforced concrete structural frame is presented. Three prototype frames designed according to the 1954 Hellenic seismic code, with…
A Simple Pendulum Technique for Achieving Seismic Isolation
- Engineering
- 1990
An innovative seismic isolation system, the Friction Pendulum System (FPS), offers improvements in strength, versatility and ease of installation as compared to previous systems. Moreover, the…