Waterproof Painting Floor (ACRYLIC Solvent)
Waterproof paint, anti-drip, solvent-based acrylic
Especially indicated for an excellent waterproofing of terraces, roofs, floors, roofs.
Allows the embalming or permanent stagnation of fresh or salt water.
Absorbs dilatations due to its great elasticity.
CLICK HERE, TO KNOW HOW TO ASK FOR A COLOR IN THE RAL CHARTER
Product customizationDon't forget to save your customization to be able to add to cart
BUY WATERPROOF PAINT FOR FLOORS INSIDE AND OUTSIDE
COMPOSITION OF WATERPROOF PAINT FOR FLOORS
Painting based on solvent-based thermoplastic acrylic resin, for application on cement floors, asphalt, etc. of air drying.
ADVANTAGES OF WATERPROOF PAINT FOR INDOOR AND OUTDOOR FLOORS
- High coverage
- High performance
- Completely passable
- Great adhesion
- Tensile strength
- Resistance to alkalinity
- Abrasion resistance
- Perfect combination between elasticity and hardness.
WHERE TO USE THE WATERPROOF PAINT FOR COLORED FLOORS?
Due to its properties, this coating is ideal for waterproofing any support, made of stone, brick, cement or printed concrete.
Suitable for waterproofing terraces, roofs, roofs, etc ...
High resistance to wear, rapid drying, plasticizing, with good penetration and adhesion capacity, high flexibility and complete protection against water and inclement weather, allows embalsamiento or permanent stagnation of water, high performance, very low degradation to the Over the years, durable finish.
HOW TO USE THE WATERPROOF PAINT FOR SOIL?
The surface to be painted must be free of dust, grease, old paint and completely dry.
Homogenize the content of the container stirring thoroughly.
If the soil is not very porous, it will be necessary to carry out a chemical or mechanical treatment to open the pore and achieve a better adherence.
On concrete or new cements will have to wait for its total setting, approximately 30 days.
The application can be done with brush, roller or air-less.
The first coat will be applied, diluting 10% with fast drying industrial solvent; for the second hand it is better not to dilute.
Do not apply below 5ºC
WATERPROOF PAINT WARNINGS FOR FLOORS
Perform good ventilation of the premises and have a good extraction system.
Use active carbon mask, safety glasses and protective gloves during application.
PRESENTATION OF WATERPROOF PAINT FOR EXTERIOR FLOORS
It comes in packages of 4.5 kilos and 23 kilos.
The technical advice for the use and use of our products is based on our best knowledge and information, as a result of the tests carried out in our laboratories and our experience collected over the years at the customer's service.
Pinturas ANGAR, SC will not be responsible for the problems caused by incorrect application of our products.
If you want to know the PRICE OF THE WATERPROOF PAINT FOR OUTSIDE FLOORS, you can consult it at the beginning of this page.
- Theoretical performance
- Between 2.5 and 3.5 square meters per Kilo and Hand (Depending on the media, whether it is new or already painted)
- After 6 hours at least
- SATIN / SLIP
- Disolvente Industrial de Secado Rápido
- Useful of Application
- BRUSH / ROLLER / AIRLESS
- Cleanliness Tool
- Industrial Dried Rapid Solvent
- Dissolution of the first hand
- Dissolution in the second hand
- BEST UNDILUTED
- BLANCO / NEGRO / AMARILLO / ROJO ÓXIDO / VERDE / GRIS / CARTA RAL
- Time of dried to a temperature of 25 ºC and a relative dampness of 50 %
- TOUCH: 1 hour
- Temperature of Application
- Do not apply below 5 ° Celsius
- Humedad del soporte
- Inferior al 5 %
The customer has rated the product but has not posted a review, or the review is pending moderation
No me podía imaginar un resultado tan excelente. Como dice en la página este producto es perfecto para impermeabilizar la terraza. Me sorprendió la cubrición que tiene este material y una gran adherencia.
Muy contenta, muchas gracias!!